Draytek Vigor 130 Setup NBNDraytek Vigor 130 Setup NBN
Under Internet Access >> PPPoE / PPPoA menu Set PPPoE/PPPoA Client to Disable Under Internet Access >> MPoA / Static or dynamic IP Set MPoA (RFC1483/2684) to Enable Encapsulation to
Under Internet Access >> PPPoE / PPPoA menu Set PPPoE/PPPoA Client to Disable Under Internet Access >> MPoA / Static or dynamic IP Set MPoA (RFC1483/2684) to Enable Encapsulation to
Steps for setting up new hardware for ADSL Your wall outlet/socket telephone cable to modem side of filter/splitter. Then into back of modem/modem router. Modem ethernet Cable into PC Check
Voice over IP relys on voice packets being sent reliably to and from Nehos over your ISP. There are a number of factors that contribute to poor performing call quality.
This article is designed to assist client that has determined that their internet access is not active and in some cases this will also be seen to stop normal phone
Your Domain & SIP Proxy will need to be set to sip.nehos.com.au (180.94.236.10) to use this network. The sip.nehos.com.au domain supports SIP signalling on UDP/TCP on port 5060 You will
Codecs The following codecs settings are available on the sip.nehos.com.au and cpbx.nehos.com.au network. G711 alaw G711 ulaw G722 The public switched telephone network (PSTN) in Australia uses G711 alaw (20ms