Generic ADSL Hardware Setup

Steps for setting up new hardware for ADSL

  1. Your wall outlet/socket telephone cable to modem side of filter/splitter.
  2. Then into back of modem/modem router.
  3. Modem ethernet Cable into PC
  4. Check device for status of DSL light on modem, it should be on within a minute.


If you are having any issue after following above mentioned steps then please contact support team at 1300 726 889 or email

Related Post

Codec SupportCodec Support

Codecs The following codecs settings are available on the and network. G711 alaw G711 ulaw G722 The public switched telephone network (PSTN) in Australia uses G711 alaw (20ms