Draytek Vigor 130 Setup NBN (no Vlan)

The Draytek Vigor 130 configuration menu can be accessed from

You will need to have a computer/laptop on the same network to access the modem i.e example

The default username and password is admin and admin.

When logged on goto

Under VDSL2 change the “Tag value” to 1

Under Internet Access >> PPPoE / PPPoA menu

Set PPPoE/PPPoA Client to Disable

Under Internet Access >> MPoA / Static or dynamic IP

Set MPoA (RFC1483/2684) to Enable

Encapsulation to 1483 Bridged IP LLC

VPI : 8

VCI : 35

Modulation : Multimode

Bridge Mode : tick “Enable Bridge Mode” and then hit ok

Related Post


Default browsers generally take care of the geolocation – https://support.google.com/websearch/answer/179386. If it does not automatically pick up the correct location, please follow the steps below: Please go into your desktop