SIP Registration

SIP Registration is only for telling the Nehos SIP Proxy which IP and port to send a call (inbound DID) to the customers equipment. The industry default is 3600 seconds, i.e., 1 hour. It should not be set higher than this. It’s also not necessary to set it lower than this or it will just […]

Read More

3CX PBX SIP Trunk Setup

Assumption here is that your 3CX Firewall Test has passed and you have already created a SIP user with password and you may have a direct in-dial in the account that binds to this SIP user. If you have not then please obtain these first. Login to your 3CX Management Console and Click SIP Trunks […]

Read More

Microsoft Lync

* Please note this is a new service and not a standard setup. Please contact Nehos Sales on 1300 726 889 or email sales@nehos.net for further information. Microsoft Lync requires a static public IP address to be able to use Nehos. You will need to provide us with your public IP address and port number […]

Read More

Presence

* This is a new feature of the cloud PBX service. To have access you need to have your existing IP handsets registered and working with the sip.nehos.com.au platform and be subscribed to the Cloud PBX service plus be using a static IP address. You will need to contact Nehos Support and request access to […]

Read More

Epygi IP PBX Setup

Assumption here is that you have already created a SIP user with password and you may have a direct in dial in the account that binds to this SIP user. If you have not then please obtain these first. Step 1. Login to your Epygi IP PBX, the default LAN IP is 172.30.0.1, the default […]

Read More

FreePBX / Asterisk

Notes here are for correctly installing and configuring FreePBX   Settings > Asterisk SIP Settings Nat Settings You need to configure depending upon your setup. For most customers that are using FreePBX behind a NAT (router) you should set Nat=yes and IP Configuration to Static IP Enter your External IP and add your Local Networks […]

Read More