Base Firmware Version needs to be 77.81.0.20 or later To register an account via web user interface: (easiest way to find base IP address, take a registered handset press ok, info and base) Enter the IP address of the base station in the address bar of the browser and press the Enter key. Enter the user name […]
Category: IP Telephone Config
Cisco SPA Series Notes
These phones default to a RTP Packet size of 30ms. To use these phones on the Nehos network you need to change this to 20ms. Under Admin > Advanced RTP change the RTP Packet Size from 0.030 to 0.020
Yealink T28 IP Phone
These instructions are based on Firmware Version 2.72.0.30. If your handset is less than this version please upgrade to ensure compatibility with our servers. Under Account tab > Account 1 Register Tab Line Active : Enabled Display Name : caller id of this sip account for example 0731071900. This must be a 10 digit geographical […]
Snom M9
Snom M9 Firmware version 9.6.2-a Network Settings STUN Server : sip.nehos.com.au:5060 STUN refresh interval in seconds : 10 Identity1 Identity active : on Server Type: Asterisk Display Name : you caller id number i.e 0731071900 Account : Nehos SIP Account Registar : sip.nehos.com.au Outbound Proxy: sip.nehos.com.au Authentication Name : Nehos SIP Account Under SIP RTP Encryption : […]